Macrium Reflect USB Rescue Media.


jimbo45 said:
With ultra modern NVMe disks -- should still work because if you made the tool in the first place using those it should be able to access those disks on restore.
Click to expand...
It may be a case of hardware shaking out to where there are only a couple of standards in use. One of the things that made it tough for OS/2 was all the various bus types. There was VEESA, Front side bus, Microchannel, as well as ISA, EISA and some others I forget. I told the guy building my 486 to use ISA. It would be slow but work with everything. The case I cited earlier I made the image using a Windows program and tried to restore using the same program while the Windows system was running. Unfortunately Vista made some changes to NTFS that the software had not caught up with. The software made a hidden partition with the rescue stuff and image so you could quickly boot into it and restore. This quick restore took 9 hours. Yet another case of stuff that should work but didn't. :)
 

My Computers

System One System Two

  • OS
    Windows 10 S Mode (with S disabled)
    Computer type
    Laptop
    Manufacturer/Model
    EV00
    CPU
    Celeron
    Motherboard
    WEIBU
    Memory
    2906 MBytes
    Graphics Card(s)
    LC116LF3L01 (1920x1080@59Hz) Intel HD Graphics (Intel)
    Sound Card
    Realtek High Definition Audio
    Monitor(s) Displays
    11.6" LCD
    Screen Resolution
    1920x1080P
    Hard Drives
    Interface SD
    Capacity 28.8 GB
    Real size 30,937,186,304 bytes
    RAID Type None
    Keyboard
    Integrated Laptop
    Mouse
    USB wired optical
    Internet Speed
    28 Mbs down 35 Mbs up on a good day
    Browser
    Opera/Edge both chromium based
    Antivirus
    none
    Other Info
    I purchased this for $109 because it is the only Laptop I have seen with 1920x1080 resolution for the money. OK for streaming, email, etc..
  • Operating System
    Windows 11 Home 64-bit (22H2 Build 22621.1413)
    Computer type
    Laptop
    Manufacturer/Model
    Lenovo Ideapad 5
    CPU
    AMD K19
    Motherboard
    LNVNB161216 (FP6)
    Memory
    8 GB DDR4
    Graphics card(s)
    AMD Radeon Graphics 2 GB DDR4
    Sound Card
    Realtek High Definition Audio
    Monitor(s) Displays
    Generic PnP Monitor on AMD Radeon Graphics
    Screen Resolution
    2560 x 1600
    Hard Drives
    512 GB SKHynix_HFS512GDE9X084N (SSD)
    Mouse
    has touchpad but I use USB wired optical wheel mouse
    Keyboard
    backlit
    Internet Speed
    100 Mb/s
    Browser
    Edge
    Antivirus
    none
    Other Info
    Windows firewall disabled
I have the Macrium Reflect Rescue on its own dedicated usb flash drive. I have another usb flash drive with Ventoy that has Windows and Linux Mint isos on it. I am thinking of moving the MR Rescue to the Ventoy flash drive. Is it as easy as just copying it over from one flash drive to the other.... will it be recognized by Ventoy as an iso…… will it work ok?
 

My Computer

System One

  • OS
    Windows 11/Linux Mint
    Computer type
    PC/Desktop
    Manufacturer/Model
    Dell Optiplex 960
    CPU
    Intel Core 2 Duo CPU E8400 @ 3.00 GHz x 2
    Memory
    8 GB
    Graphics Card(s)
    Intel 4 Series Chipset Integrated Graphics Controller
    Monitor(s) Displays
    HP x22LED
    Hard Drives
    Crucial 250 GB SSD, HD 1Tb
mackie said:
I have the Macrium Reflect Rescue on its own dedicated usb flash drive. I have another usb flash drive with Ventoy that has Windows and Linux Mint isos on it. I am thinking of moving the MR Reflect to the Ventoy flash drive. Is it as easy as just copying it over from one flash drive to the other.... will it be recognized by Ventoy as an iso…… will it work ok?
Click to expand...
Better to leave it alone, then if one usb drive packs up, you still got the other. You could try copying the files before you delete them from the other drive and check they work.
 

My Computers

System One System Two

  • OS
    Windows 11 Pro
    Computer type
    Laptop
    Manufacturer/Model
    Alienware M18 R1
    CPU
    13th Gen Core i9 13900HX
    Memory
    32GB DDR5 @4800MHz 2x16GB
    Graphics Card(s)
    Geforce RTX 4090HX 16GB
    Sound Card
    Nvidia HD / Realtek ALC3254
    Monitor(s) Displays
    18" QHD+
    Screen Resolution
    25660 X 1600
    Hard Drives
    C: KIOXIA (Toshiba) 2TB KXG80ZNV2T04 NVMe PCIe M.2 SSD
    D: KIOXIA (Toshiba) 2TB KXG80ZNV2T04 NVMe PCIe M.2 SSD
    Case
    Dark Metallic Moon
    Keyboard
    Alienware M Series per-key AlienFX RGB
    Mouse
    Alienware AW610M
    Browser
    Chrome and Firefox
    Antivirus
    Norton
    Other Info
    Killer E3000 Ethernet Controller
    Killer Killer AX1690 Wi-Fi Network Adaptor Wi-Fi 6E
    Bluetooth 5.2
    Alienware Z01G Graphic Amplifier
  • Operating System
    Windows 11 Pro
    Computer type
    Laptop
    Manufacturer/Model
    Alienware Area 51m R2
    CPU
    10th Gen i-9 10900 K
    Memory
    32Gb Dual Channel DDR4 @ 8843MHz
    Graphics card(s)
    Nvidia RTX 2080 Super
    Sound Card
    Nvidia
    Screen Resolution
    1920 x 1080
    Hard Drives
    Hard Drive C: Samsung 2TB SSD PM981a NVMe
    Hard Drive D:Samsung 2TB SSD 970 EVO Plus
    Mouse
    Alienware 610M
    Browser
    Chrome
    Antivirus
    Norton
Yeah, I thought about that…. I.e., putting all the eggs in one basket thing. Now just wondering if Ventoy would recognize Rescue as another iso? Maybe I will try it sometime.
 

My Computer

System One

  • OS
    Windows 11/Linux Mint
    Computer type
    PC/Desktop
    Manufacturer/Model
    Dell Optiplex 960
    CPU
    Intel Core 2 Duo CPU E8400 @ 3.00 GHz x 2
    Memory
    8 GB
    Graphics Card(s)
    Intel 4 Series Chipset Integrated Graphics Controller
    Monitor(s) Displays
    HP x22LED
    Hard Drives
    Crucial 250 GB SSD, HD 1Tb
mackie said:
I am thinking of moving the MR Rescue to the Ventoy flash drive. Is it as easy as just copying it over from one flash drive to the other.... will it be recognized by Ventoy as an iso…… will it work ok?
Click to expand...
No. it won't.

If you want to add the MR rescue to your Ventoy usb, then open Macrium Reflect, select Rescue, and choose the option to make an ISO file. That you'll be able to use with your Ventoy.

1683561697902.png
 

My Computers

System One System Two

  • OS
    Windows 11 Home
    Computer type
    Laptop
    Manufacturer/Model
    Acer Aspire 3 A315-23
    CPU
    AMD Athlon Silver 3050U
    Memory
    8GB
    Graphics Card(s)
    Radeon Graphics
    Monitor(s) Displays
    laptop screen
    Screen Resolution
    1366x768 native resolution, up to 2560x1440 with Radeon Virtual Super Resolution
    Hard Drives
    1TB Samsung EVO 870 SSD
    Internet Speed
    50 Mbps
    Browser
    Edge, Firefox
    Antivirus
    Defender
    Other Info
    fully 'Windows 11 ready' laptop. Windows 10 C: partition migrated from my old unsupported 'main machine' then upgraded to 11. A test migration ran Insider builds for 2 months. When 11 was released on 5th October 2021 it was re-imaged back to 10 and was offered the upgrade in Windows Update on 20th October. Windows Update offered the 22H2 Feature Update on 20th September 2022. It got the 23H2 Feature Update on 4th November 2023 through Windows Update, and 24H2 on 3rd October 2024 through Windows Update by setting the Target Release Version for 24H2.

    My SYSTEM THREE is a Dell Latitude 5410, i7-10610U, 32GB RAM, 512GB NVMe ssd, supported device running Windows 11 Pro (and all my Hyper-V VMs).

    My SYSTEM FOUR is a 2-in-1 convertible Lenovo Yoga 11e 20DA, Celeron N2930, 8GB RAM, 256GB ssd. Unsupported device: currently running Win10 Pro, plus Win11 Pro RTM and Insider Dev, Beta, and RP 24H2 as native boot vhdx.

    My SYSTEM FIVE is a Dell Latitude 3190 2-in-1, Pentium Silver N5030, 8GB RAM, 512GB NVMe ssd, supported device running Windows 11 Pro, plus the Insider Beta, Dev, Canary, and Release Preview builds as a native boot .vhdx.
  • Operating System
    Windows 11 Pro
    Computer type
    Laptop
    Manufacturer/Model
    Dell Latitude E4310
    CPU
    Intel® Core™ i5-520M
    Motherboard
    0T6M8G
    Memory
    8GB
    Graphics card(s)
    (integrated graphics) Intel HD Graphics
    Screen Resolution
    1366x768
    Hard Drives
    500GB Crucial MX500 SSD
    Browser
    Firefox, Edge
    Antivirus
    Defender
    Other Info
    unsupported machine: Legacy bios, MBR, TPM 1.2, upgraded from W10 to W11 using W10/W11 hybrid install media workaround. In-place upgrade to 22H2 using ISO and a workaround. Feature Update to 23H2 by manually installing the Enablement Package. In-place upgrade to 24H2 using hybrid 23H2/24H2 install media. Also running Insider Beta, Dev, and Canary builds as a native boot .vhdx.

    My SYSTEM THREE is a Dell Latitude 5410, i7-10610U, 32GB RAM, 512GB NVMe ssd, supported device running Windows 11 Pro (and all my Hyper-V VMs).

    My SYSTEM FOUR is a 2-in-1 convertible Lenovo Yoga 11e 20DA, Celeron N2930, 8GB RAM, 256GB ssd. Unsupported device: currently running Win10 Pro, plus Win11 Pro RTM and Insider Dev, Beta, and RP 24H2 as native boot vhdx.

    My SYSTEM FIVE is a Dell Latitude 3190 2-in-1, Pentium Silver N5030, 8GB RAM, 512GB NVMe ssd, supported device running Windows 11 Pro, plus the Insider Beta, Dev, Canary, and Release Preview builds as a native boot .vhdx.
The Macrium resque-ISO works perfectly with Ventoy , using it from the start , Ventoy with Macrium-ISO ! :wink:
 

My Computer

System One

  • OS
    Windows11 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    Asus
    CPU
    i7
    Motherboard
    z97k
    Memory
    32GB
    Graphics Card(s)
    nVidia
    Sound Card
    Realtek
    Hard Drives
    3
    Cooling
    air
Bree said:
No. it won't.

If you want to add the MR rescue to your Ventoy usb, then open Macrium Reflect, select Rescue, and choose the option to make an ISO file. That you'll be able to use with your Ventoy.

View attachment 59689
Click to expand...
Bree,

In your example then, the iso file would be copied from the TEMP\MacriumRescue.iso file to the Ventoy usb, and that is all, right? Easy as that.
 

My Computer

System One

  • OS
    Windows 11/Linux Mint
    Computer type
    PC/Desktop
    Manufacturer/Model
    Dell Optiplex 960
    CPU
    Intel Core 2 Duo CPU E8400 @ 3.00 GHz x 2
    Memory
    8 GB
    Graphics Card(s)
    Intel 4 Series Chipset Integrated Graphics Controller
    Monitor(s) Displays
    HP x22LED
    Hard Drives
    Crucial 250 GB SSD, HD 1Tb
mackie said:
In your example then, the iso file would be copied from the TEMP\MacriumRescue.iso file to the Ventoy usb, and that is all, right? Easy as that.
Click to expand...
Yes, easy as that. Use it the same way in Ventoy as all your other ISOs.
 

My Computers

System One System Two

  • OS
    Windows 11 Home
    Computer type
    Laptop
    Manufacturer/Model
    Acer Aspire 3 A315-23
    CPU
    AMD Athlon Silver 3050U
    Memory
    8GB
    Graphics Card(s)
    Radeon Graphics
    Monitor(s) Displays
    laptop screen
    Screen Resolution
    1366x768 native resolution, up to 2560x1440 with Radeon Virtual Super Resolution
    Hard Drives
    1TB Samsung EVO 870 SSD
    Internet Speed
    50 Mbps
    Browser
    Edge, Firefox
    Antivirus
    Defender
    Other Info
    fully 'Windows 11 ready' laptop. Windows 10 C: partition migrated from my old unsupported 'main machine' then upgraded to 11. A test migration ran Insider builds for 2 months. When 11 was released on 5th October 2021 it was re-imaged back to 10 and was offered the upgrade in Windows Update on 20th October. Windows Update offered the 22H2 Feature Update on 20th September 2022. It got the 23H2 Feature Update on 4th November 2023 through Windows Update, and 24H2 on 3rd October 2024 through Windows Update by setting the Target Release Version for 24H2.

    My SYSTEM THREE is a Dell Latitude 5410, i7-10610U, 32GB RAM, 512GB NVMe ssd, supported device running Windows 11 Pro (and all my Hyper-V VMs).

    My SYSTEM FOUR is a 2-in-1 convertible Lenovo Yoga 11e 20DA, Celeron N2930, 8GB RAM, 256GB ssd. Unsupported device: currently running Win10 Pro, plus Win11 Pro RTM and Insider Dev, Beta, and RP 24H2 as native boot vhdx.

    My SYSTEM FIVE is a Dell Latitude 3190 2-in-1, Pentium Silver N5030, 8GB RAM, 512GB NVMe ssd, supported device running Windows 11 Pro, plus the Insider Beta, Dev, Canary, and Release Preview builds as a native boot .vhdx.
  • Operating System
    Windows 11 Pro
    Computer type
    Laptop
    Manufacturer/Model
    Dell Latitude E4310
    CPU
    Intel® Core™ i5-520M
    Motherboard
    0T6M8G
    Memory
    8GB
    Graphics card(s)
    (integrated graphics) Intel HD Graphics
    Screen Resolution
    1366x768
    Hard Drives
    500GB Crucial MX500 SSD
    Browser
    Firefox, Edge
    Antivirus
    Defender
    Other Info
    unsupported machine: Legacy bios, MBR, TPM 1.2, upgraded from W10 to W11 using W10/W11 hybrid install media workaround. In-place upgrade to 22H2 using ISO and a workaround. Feature Update to 23H2 by manually installing the Enablement Package. In-place upgrade to 24H2 using hybrid 23H2/24H2 install media. Also running Insider Beta, Dev, and Canary builds as a native boot .vhdx.

    My SYSTEM THREE is a Dell Latitude 5410, i7-10610U, 32GB RAM, 512GB NVMe ssd, supported device running Windows 11 Pro (and all my Hyper-V VMs).

    My SYSTEM FOUR is a 2-in-1 convertible Lenovo Yoga 11e 20DA, Celeron N2930, 8GB RAM, 256GB ssd. Unsupported device: currently running Win10 Pro, plus Win11 Pro RTM and Insider Dev, Beta, and RP 24H2 as native boot vhdx.

    My SYSTEM FIVE is a Dell Latitude 3190 2-in-1, Pentium Silver N5030, 8GB RAM, 512GB NVMe ssd, supported device running Windows 11 Pro, plus the Insider Beta, Dev, Canary, and Release Preview builds as a native boot .vhdx.
pietcorus2 said:
The Macrium resque-ISO works perfectly with Ventoy , using it from the start , Ventoy with Macrium-ISO ! :wink:
Click to expand...
On some PCs, ventoy only boots the Rescue Drive in 800x600 format - it is a well known (bios related) "bug".

You can still use it but tthe finish button is offscreen, so you have to drag the windows to the left to click the button.

For the cost of usb drives, I find ventoy to be too much of a PITA keeping it updated.
 

My Computer

System One

  • OS
    Windows 11 Pro + Win11 Canary VM.
    Computer type
    Laptop
    Manufacturer/Model
    ASUS Zenbook 14
    CPU
    I9 13th gen i9-13900H 2.60 GHZ
    Motherboard
    Yep, Laptop has one.
    Memory
    16 GB soldered
    Graphics Card(s)
    Integrated Intel Iris XE
    Sound Card
    Realtek built in
    Monitor(s) Displays
    laptop OLED screen
    Screen Resolution
    2880x1800 touchscreen
    Hard Drives
    1 TB NVME SSD (only weakness is only one slot)
    PSU
    Internal + 65W thunderbolt USB4 charger
    Case
    Yep, got one
    Cooling
    Stella Artois (UK pint cans - 568 ml) - extra cost.
    Keyboard
    Built in UK keybd
    Mouse
    Bluetooth , wireless dongled, wired
    Internet Speed
    900 mbs (ethernet), wifi 6 typical 350-450 mb/s both up and down
    Browser
    Edge
    Antivirus
    Defender
    Other Info
    TPM 2.0, 2xUSB4 thunderbolt, 1xUsb3 (usb a), 1xUsb-c, hdmi out, 3.5 mm audio out/in combo, ASUS backlit trackpad (inc. switchable number pad)

    Macrium Reflect Home V8
    Office 365 Family (6 users each 1TB onedrive space)
    Hyper-V (a vm runs almost as fast as my older laptop)
"
For the cost of usb drives, I find ventoy to be too much of a PITA keeping it updated."
.............?? why ,its a vey good piece of software. ! :wink:

​

 

My Computer

System One

  • OS
    Windows11 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    Asus
    CPU
    i7
    Motherboard
    z97k
    Memory
    32GB
    Graphics Card(s)
    nVidia
    Sound Card
    Realtek
    Hard Drives
    3
    Cooling
    air
Ventoy is handy.

Another way is to add multiple bootable wims to the sources folder on a bootable usb you already have and add a bcd entry for each.

copy the existing winpe bcd entry and just change the name and decription to match the name of the wim file you added. Pretty easy.

you could change the name of macrium boot.wim from e.g your lenovo laptop to lets say macrium-lenovo.wim
and change the name of the macrium boot.wim from your asus z790 desktop to lets say macrium-z790.wim

Or any names you like. Copy them into the sources folder. Copy the existing winpe entry in usbstick\efi\microsft\boot\bcd and change the names in the bcd entry. Then you can choose whichever from the boot menu.

I have been doing it for as long as I can remember.
 
Last edited:

My Computers

System One System Two

  • OS
    Win7,Win11
    Computer type
    PC/Desktop
    CPU
    i5-8400
    Motherboard
    gigabyte b365m ds3h
    Memory
    2x8gb 3200mhz
    Monitor(s) Displays
    benq gw2480
    PSU
    bequiet pure power 11 400CM
    Cooling
    cryorig m9i
  • Operating System
    win7,win11
    Computer type
    PC/Desktop
    CPU
    pentium g5400
    Motherboard
    gigabyte b365m ds3h
    Memory
    1x8gb 2400
    PSU
    xfx pro 450
I've only created 1 USB rescue media for Macrium and I have been able to use that same USB key on all of my machines at my house that I have run Macrium on.
 

My Computers

System One System Two

  • OS
    Windows 11 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    Beelink SEI8
    CPU
    Intel Core i5-8279u
    Motherboard
    AZW SEI
    Memory
    32GB DDR4 2666Mhz
    Graphics Card(s)
    Intel Iris Plus 655
    Sound Card
    Intel SST
    Monitor(s) Displays
    Asus ProArt PA278QV
    Screen Resolution
    2560x1440
    Hard Drives
    512GB NVMe
    PSU
    NA
    Case
    NA
    Cooling
    NA
    Keyboard
    NA
    Mouse
    NA
    Internet Speed
    500/50
    Browser
    Edge
    Antivirus
    Defender
    Other Info
    Mini PC used for testing Windows 11.
  • Operating System
    Windows 10 Pro
    Computer type
    PC/Desktop
    Manufacturer/Model
    Custom
    CPU
    Ryzen 9 5900x
    Motherboard
    Asus Rog Strix X570-E Gaming
    Memory
    64GB DDR4-3600
    Graphics card(s)
    EVGA GeForce 3080 FT3 Ultra
    Sound Card
    Onboard
    Monitor(s) Displays
    ASUS TUF Gaming VG27AQ. ASUS ProArt Display PA278QV 27” WQHD
    Screen Resolution
    2560x1440
    Hard Drives
    2TB WD SN850 PCI-E Gen 4 NVMe
    2TB Sandisk Ultra 2.5" SATA SSD
    PSU
    Seasonic Focus 850
    Case
    Fractal Meshify S2 in White
    Cooling
    Dark Rock Pro CPU cooler, 3 x 140mm case fans
    Mouse
    Logitech G9 Laser Mouse
    Keyboard
    Corsiar K65 RGB Lux
    Internet Speed
    500/50
    Browser
    Chrome
    Antivirus
    Defender.
You probably can. But last time I looked there is a drivers folder in the macrium boot.wim which was gathered from the machine it was created on, that it annoyingly attempts to load. Might not matter depending on what is required by the particular machine.

I have multiple winpes for 11,10,7 and a few others all in one sources folder on one usb sick . I also have some programs on the usb stick which the winpes I made link to . Those programs run off the usb which is writable and persistent so they can easily be changed/updated/added to etc.

Nothing to do with macrium. It is just an alternative to ventoy so multiple bootable wims can live on one usb easily.

And it is easier to add/change those programs ( or even the bootable wim ) on the usb than rebuilding an iso and swapping it with the previous one on ventoy.
 
Last edited:

My Computers

System One System Two

  • OS
    Win7,Win11
    Computer type
    PC/Desktop
    CPU
    i5-8400
    Motherboard
    gigabyte b365m ds3h
    Memory
    2x8gb 3200mhz
    Monitor(s) Displays
    benq gw2480
    PSU
    bequiet pure power 11 400CM
    Cooling
    cryorig m9i
  • Operating System
    win7,win11
    Computer type
    PC/Desktop
    CPU
    pentium g5400
    Motherboard
    gigabyte b365m ds3h
    Memory
    1x8gb 2400
    PSU
    xfx pro 450
You must log in or register to reply here.

Similar threads

Solved Macrium Reflect v8.1.8110 – Unable to create rescue media
Replies
16
Views
1K
Bree
Bree
Macrium Reflect License.
Replies
3
Views
249
Mitch
M
Restore Macrium Reflect Image from Boot Menu.
Replies
7
Views
373
Bree
Bree
EaseUS Todo Backup or Macrium Reflect X
Replies
3
Views
429
Hairy Scot
Hairy Scot
Macrium Reflect password protect images
Replies
7
Views
185
kelper
kelper

Latest Support Threads

Latest Tutorials

Back
Top Bottom