@echo off
setlocal enabledelayedexpansion
setlocal enableextensions
cd /d %~dp0
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: This batch file will allow you to create a Windows installation disk. This can be a flash drive, HDD or ::
:: an SSD. It is designed to create a drive that will boot on either a BIOS or UEFI based system and it is ::
:: perfectly fine for any files in the installation media to be larger than 4 GB. ::
:: ::
:: Note that Windows 11 is only available in 64-bit editions, while Windows 10 is available in both 32-bit ::
:: and 64-bit editions. Since this batch file is perfectly capable of creating dual architecture media it is ::
:: perfectly suitable for the creation of both Windows 10 and Windows 11 boot media, regardless of whether ::
:: the image is 32-bit or 64-bit. ::
:: ::
:: Originally created December 2020 by HSehestedt and Ztruker ::
:: Last updated September 9, 2024 ::
:: ::
:: Version 2.01.13 ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: A quick note about storage size: Microsoft considers 1 KB to be 1024 bytes rather than 1000 bytes. However, ::
:: storage vendors typically consider 1 KB to be 1000 bytes. In order to be completely technically correct, the ::
:: latest convention holds that 1 KB = 1000 bytes and 1 KiB = 1024 bytes, but Microsoft uses the term KB for ::
:: for what should technically be a KiB. In the text below we are not getting caught up in these differences. ::
:: If you see that Windows reports slightly different sizes than expected, this is the reason why. This will ::
:: not make any difference to what we are doing here. ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Explanation of User Customizable Settings :: ::
::::::::::::::::::::::::::::::::::::::::::::::: ::
:: Set the variables below to customize the behavior of the batch file. ::
:: ::
:: NOTE: Values supplied can be either uppercase, lowercase, or mixed case. However, please note that for the ::
:: FAT32 partition, the volume name will be automatically converted to uppercase since FAT32 volume names can ::
:: only be uppercase. ::
:: ::
:: HideDetails - Set to "Y" to hide the details of every file being copied. Set to "N" or anything other than ::
:: "Y" to show the detailed copy status. May be helpful for troubleshooting. ::
:: ::
:: Partition1Size - This specifies the size in MB to create the first FAT32 partition. Suggestion: 1000 MB ::
:: (1GB) should be a good value for most situations. Use a number only (no MB after the number). If you use a ::
:: customized image with many Windows editions, it's possible that you may need to increase the size of this ::
:: partition. ::
:: ::
:: Part2SizeLimit - Set to either "N" or a numerical value. If you set this to "N", the size of the 2nd ::
:: partition will be unlimited and will be created with all the remaining space not used by partition 1. If ::
:: you would like to limit the size of the partition, specify a size in MB to create this partition. ::
:: Note: 1 GB would be 1000 and 1 TB would be 1000000 (DON'T USE A COMMA IN VALUE!). Limiting the size is ::
:: useful if you want to add other partitions to the drive. For example, I have a flash drive that I can ::
:: install Windows from, but it also has another partition that is BitLocker protected with all my software ::
:: applications, personal documents, etc. ::
:: ::
:: Part2FS - This sets the filesystem type to use on the 2nd partition. Either exFAT or NTFS can be specified. ::
:: Set this value to either "NTFS" or "exFAT". My personal preference is to always use NTFS. ::
:: ::
:: Partition1Name - This is the volume label to give the first partition. Since this is a FAT32 partition, the ::
:: volume label is limited to 11 characters. ::
:: ::
:: Partition2Name - This is the volume label to give the second partition. If you choose to use exFAT you are ::
:: limited to 11 characters. With NTFS you have up to 32 characters. Note that by default we use the name ::
:: PAR-2-%Part2FS%. The %Part2FS% is the variable that contains either NTFS or exFAT (whichever you specified ::
:: for that variable). Of course, you do not have to use this and can modify it if you wish. ::
:: ::
:: PartType - Set to either MBR or GPT. Normally, leave this set to MBR. An MBR partition type will allow for the ::
:: greatest compatibility with both BIOS and UEFI based systems. However, it is limited to disks with up to ::
:: 2 TB in size. If you plan to use a disk larger than 2 TB you must specify a GPT partition type. Please be ::
:: aware that doing this will limit compatibility so that it will not work on BIOS based systems. ::
:: ::
:: AutoDismount - Set this to Y if you want the source ISO image to be automatically dismounted by this batch ::
:: file when it is done running. If you do NOT want the image dismounted, set this to N. NOTE: Technically, ::
:: the image will be dismounted when set to anything other than N. ::
:: IMPORTANT: Set this to Y only if the source is an ISO image. If you are pointing to a folder on a drive, ::
:: then this should be set to N.
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: User defined variables
set HideDetails=Y
set Partition1Size=1000
set Part2SizeLimit=N
set Part2FS=NTFS
set Partition1Name=PAR-1-FAT32
set Partition2Name=PAR-2-%Part2FS%
set PartType=MBR
set AutoDismount=Y
:: End of user defined variables
:start
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Check to see if this batch file is being run as Administrator. If it is not, then rerun the batch file ::
:: automatically as admin and terminate the intial instance of the batch file. ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
(Fsutil Dirty Query %SystemDrive%>Nul)||(PowerShell start """%~f0""" -verb RunAs & Exit /B)
::::::::::::::::::::::::::::::::::::::::::::::::
:: End Routine to check if being run as Admin ::
::::::::::::::::::::::::::::::::::::::::::::::::
:: We reach this point once the batch file is run as admin
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Convert all variable values to uppercase to make handling easier. ::
:: We do this by calling a user function called TOUPPERCASE. ::
:: ::
:: NOTE: We do NOT convert the volume name for the 2nd partition to ::
:: uppercase since lowercase volume names are valid for both exFAT ::
:: and NTFS partitions. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
call ::TOUPPERCASE HideDetails
call ::TOUPPERCASE Partition1Size
call ::TOUPPERCASE Part2SizeLimit
call ::TOUPPERCASE Part2FS
call ::TOUPPERCASE Partition1Name
call ::TOUPPERCASE PartType
call ::TOUPPERCASE AutoDismount
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: If the user wants to hide the details of files being copied, we append a "/nfl /ndl" to the end ::
:: of robocopy commands. By setting a flag to either nothing or to "/nfl /ndl" we can use the same ::
:: commands and the variable "flag" at the end of each command will determine how the command behaves. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
if %HideDetails%==Y (
set flag=/nfl /ndl
) ELSE (
set flag=
)
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Change the console mode to 120 columns wide by 25 lines high ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
mode con: cols=120 lines=25
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Ask user for location of mounted ISO image or the directory containing the Windows files ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
cls
echo Introduction
echo ============
echo.
echo This batch file will create a bootable flash drive from a mounted Windows ISO image or an image extracted to disk.
echo If you are using an ISO image, mount it before you continue by double-clicking the ISO image and note the drive
echo letter to which it is mounted.
echo.
echo You will be asked if you want to wipe the destination disk or perform a refresh operation. If this is the first
echo time preparing the disk, use the WIPE option. Be aware that this will destroy ALL data currently on the disk^^!
echo.
echo If you choose the REFRESH option, you will be asked for the drive letter of the two partitions previously
echo created on the disk. We will then replace the files on these partitions with those from the source that you
echo specify. This is especially helpful if you create additional partitions on the disk because it will update
echo the first two partitions while leaving any additional partitions intact.
echo.
pause
cls
echo Do you want to perform a WIPE operation or a REFRESH operation?
echo.
choice /C WR /N /M "Press W or R to respond:"
if errorlevel 2 set WipeRefresh=REFRESH & goto GetSourcePath
if errorlevel 1 set WipeRefresh=WIPE & goto GetSourcePath
:GetSourcePath
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Get the path to the Windows source files. ::
:: Tip: The path can end with or without a backslash (\). For example, ::
:: either D:, D:\, D:\ISO_Files, D:\ISO_Files\ are all valid paths. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
cls
echo Please enter the path to the SOURCE where your Windows files are located. This location can be a folder on a
echo HDD, SSD, etc. or it can be a mounted Windows ISO image. The path can end with or without a backslash (\).
echo The following are all examples of valid paths:
echo.
echo D:, D:\, D:\ISO_Files, D:\ISO_Files\ are all valid paths.
echo.
echo Enter the path to the SOURCE where your Windows files are located below.
echo.
:GetSourcePath
set /p SourcePath="Enter source path: "
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Add a trailing backslash (\) if one does not exist. This ensures ::
:: consistency so that the source path always ends with a backslash. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
IF NOT "%SourcePath:~-1%"=="\" (
set SourcePath=%SourcePath%\
)
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Any valid Windows boot media will have a file called "boot\bootfix.bin" on the drive. This is true for both ::
:: single architecture images (x64 or x86) or for images with dual architectures. We will do a simple check to ::
:: see if such a file exists as a basic test for a valid source image location. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
if NOT EXIST %SourcePath%boot\bootfix.bin (
cls
echo The location that you specified does not contain a valid Windows image. Please try another location.
echo If you are specifying a location on disk, please be sure to specify the location to the root of the
echo Windows image. If you are using an ISO image, you should double-click the ISO image to mount it and
echo note the drive letter to which it was mounted.
echo.
goto GetSourcePath
)
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: The directory structure for a dual architecture image (one that has BOTH x64 and x86 images) will include ::
:: \x64 and \x86 folders. In order for us to properly handle this, we need to determine if the source specified ::
:: is a single of dual architecture image. To do so, we will simply check for the existance on a \x64 folder. ::
:: The variable Architecture will be set to either SINGLE or DUAL. ::
:: ::
:: TIP: Windows 11 is only available in 64-bit editions. As a result, you will never have a dual architecture ::
:: edition of Windows 11. ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
if exist %SourcePath%\x64 (
set Architecture=DUAL
) ELSE (
set Architecture=SINGLE
)
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: If a refresh operation was selected, then we need to ask the user for the drive letter associated ::
:: with the partitions. Otherwise, we need to identify what disk will be wiped. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
If %WipeRefresh%==WIPE goto GetDiskNum
:GetPar1Letter
cls
echo Please enter the drive letter of the FIRST partition (the FAT32 partition) on the disk that we will refresh. Please
echo enter a drive letter only with no colon (:).
echo.
set /P Partition1="Drive letter of FIRST partition: "
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: As a safety check, verify that the first partition has a file \boot\bootfix.bin ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
if exist %Partition1%:\boot\bootfix.bin goto GetPar2Letter
cls
echo ERROR! Either the drive letter you specified does not exist or it does not seem to contain a previously
echo created partition with suitable Windows installation files.
echo.
echo Please verify that you have specified the correct drive letter.
echo.
pause
goto GetPar1Letter
:GetPar2Letter
cls
echo Please enter the drive letter of the SECOND partition (the exFAT or NTFS partition) on the disk that we will
echo refresh. Please enter a drive letter only with no colon (:).
echo.
set /P Partition2="Drive letter of SECOND partition: "
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: As a safety check, verify that the second partition has either a \sources or a \x64 folder. ::
:: A \sources folder will exist for either an x64 or x86 image, while \x64 and \x86 folders ::
:: will exist only on a dual architecture image. We only need to check for one of these to ::
:: know if the image is dual architecture. In this batch file, we just check for the existance ::
:: of an \x64 folder. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
if exist %Partition2%:\Sources goto Par2Valid
if exist %Partition2%:\x64 goto Par2Valid
cls
echo ERROR! Either the drive letter you specified does not exist or it does not seem to contain a previously
echo created partition with suitable Windows installation files.
echo.
echo Please verify that you have specified the correct drive letter.
echo.
pause
goto GetPar2Letter
:Par2Valid
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Since we are performing a refresh operation, there is no need for us to get a disk number. We will ::
:: skip that and proceed to the summary screen. ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
goto Summary
:GetDiskNum
:::::::::::::::::::::::::::::::::::::::::::::::::
:: Display a list of disks seen by the system. ::
:::::::::::::::::::::::::::::::::::::::::::::::::
cls
(echo list disk
echo exit
) | diskpart
echo.
echo Above is a list of disks connected to your system. Scroll up if the list is too long.
echo CAUTION: *MAKE SURE* that you specify the correct disk because it will be erased. Press CTRL + C to abort.
echo.
set /p DiskID="Enter the disk number for the DESTINATION disk (Enter only the number and press ENTER): "
if [%DiskID%] EQU [] Goto GetDiskNum
:Summary
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Display a summary of options that will be used and get confirmation ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
cls
echo Summary of options you have selected:
echo.
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: These summary items apply to both WIPE and REFRESH operations ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
call ::TOUPPERCASE SourcePath
echo Path for the source files: %SourcePath%
if %HideDetails%==Y (
echo File copy status details WILL NOT be displayed
) ELSE (
echo File copy status details WILL be displayed
)
if %AutoDismount%==Y (
echo The ISO image will be automatically dismounted when we are done with it
)
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: The summary items below apply only to WIPE operations, so if a ::
:: REFRESH is being performed, skip this section ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
if %WipeRefresh%==REFRESH goto RefreshSummary
echo Drive number to make bootable: %DiskID%
echo Partition type: %PartType%
echo Partition 1 size: %Partition1Size% MB
echo Partition 2 filesystem type: %Part2FS%
if NOT %Part2SizeLimit%==N (
echo Partition 2 size: %Part2SizeLimit% MB
) ELSE (
echo Partition 2 size: Use all remaining space
)
echo Partition 1 volume label: %Partition1Name%
echo Partition 2 volume label: %Partition2Name%
goto GetConfirmation
:RefreshSummary
::::::::::::::::::::::::::::::::::::::::::::::::::::
:: These items apply only to a REFRESH operation. ::
::::::::::::::::::::::::::::::::::::::::::::::::::::
call ::TOUPPERCASE Partition1
call ::TOUPPERCASE Partition2
echo Drive letter of FIRST partition to refresh: %Partition1%:
echo Drive letter of SECOND partition to refresh: %Partition2%:
:GetConfirmation
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Time to get final confirmation from user. If the user does not confirm ::
:: that everything is correct, show some possible resolutions. ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
echo.
choice /C YN /N /M "Is this correct? (Press Y or N to respond):"
if errorlevel 2 (
cls
echo.
echo Symptom Corrective Action
echo ======= =================
echo Source path is wrong: Run the program again and respond with the correct path
echo Wrong drive number for a WIPE: Run the program again and respond with the correct drive number
echo Wrong drive letters for a REFRESH: Run the program again and respond with the correct drive letters
echo File copy status display incorrect: Change the setting of "HideDetails" at start of program
echo Wrong partition sizes: Change the setting of "Partition1Size" or "Part2SizeLimit" at start of program
echo Wrong volume labels for a WIPE: Change the setting of "Partition1Name" or "Partition2Name" at start of program
echo Wrong partition type: Change the setting of "PartType" at start of program
echo.
pause
exit
)
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: We are creating 2 partions. A FAT32 partition and an exFAT or NTFS partition. We only need the \sources ::
:: folder on the exFAT or NTFS partition. On the FAT32 partition, we want everything else. We also want the ::
:: single file called BOOT.WIM in the \sources folder on the FAT32 partition. ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
cls
if %WipeRefresh%==WIPE echo We are performing the initial partitioning the destination drive to free up any used drive letters.
if %WipeRefresh%==REFRESH echo We are refreshing drives %Partition1%: and %Partition2%:. Other partitions will be left alone.
echo Please be patient^^! This can take a while if your drive is slow.
echo.
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: If we are performing a REFRESH, then there are a lot of steps that we can skip. ::
:: As a result, we will skip to the CopyOperations section. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
if %WipeRefresh%==REFRESH goto CopyOperations
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: We will first wipe the selected disk. This will free up any drive letters currently used by that disk. ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
(echo select disk %DiskID%
echo clean
echo convert %PartType%
echo rescan
echo exit
) | diskpart > nul
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Ask user for drive letters to assign to the partitions on the destination drive ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:GetPar1DriveLetter
cls
echo Please enter the drive letter to assign to the FIRST partition (the FAT32 partition). Please enter
echo a drive letter only with no colon (:).
echo.
set /p Partition1="Enter the drive letter to assign to Partition #1: "
if exist %Partition1%: (
echo.
echo That drive letter is already in use. Please choose another.
echo.
pause
goto GetPar1DriveLetter
)
:GetPar2DriveLetter
cls
echo Please enter the drive letter to assign to the SECOND partition (the NTFS partition). Please enter
echo a drive letter only with no colon (:).
echo.
set /p Partition2="Enter the drive letter to assign to Partition #2: "
if exist %Partition2%: (
echo.
echo That drive letter is already in use. Please choose another.
echo.
pause
goto GetPar2DriveLetter
)
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Capitalize the drive letters. This serves no real purpose other than ::
:: making the output of the messages below look a bit better when we ::
:: confirm the drive letter assignments. ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
call ::TOUPPERCASE Partition1
call ::TOUPPERCASE Partition2
:::::::::::::::::::::::::::::::::
:: Prepare the first partition ::
:::::::::::::::::::::::::::::::::
cls
echo The first partition will be assigned drive letter %Partition1%: and will be formatted with FAT32.
(echo select disk %DiskID%
echo create partition primary size=%Partition1Size%
echo format fs=fat32 quick
echo assign letter=%Partition1%
echo active
echo rescan
echo exit
) | diskpart > nul
::::::::::::::::::::::::::::::::::
:: Prepare the second partition ::
::::::::::::::::::::::::::::::::::
echo The second partition will be assigned drive letter %Partition2%: and will be formatted with %Part2FS%.
echo.
if %Part2SizeLimit%==N goto NoSizeLimit
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: User has elected to create the second partition with a specific size ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
(echo select disk %DiskID%
echo create partition primary size=%Part2SizeLimit%
echo format fs=%Part2FS% quick
echo assign letter=%Partition2%
echo rescan
echo exit
) | diskpart > nul
goto PartitionsCreated
:NoSizeLimit
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: User has elected create the second partition with all remaining space ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
(echo select disk %DiskID%
echo create partition primary
echo format fs=%Part2FS% quick
echo assign letter=%Partition2%
echo rescan
echo exit
) | diskpart > NUL
:PartitionsCreated
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Set volume labels on the two partitions that we just created. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
label %Partition1%:%Partition1Name%
label %Partition2%:%Partition2Name%
:CopyOperations
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: This section is for the copy operations from SOURCE to DESTINATION ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Technical Notes: ::
:: ::
:: Some flash drives present themselves as a fixed disk and as a result they my have a recyle bin folder on them. ::
:: We are excluding the system folders which includes the recycle bin from the following operation. The /njh and ::
:: /njs switches prevent robocopy from displaying the header and summary information. If you want to stop robocopy ::
:: from displaying file copy progress just add a /nfl /ndl (No File Listing and No Directory Listing) to each ::
:: robocopy command. Note that if the user elected to hide details of the copy operation, then the variable "flag" ::
:: will be set to "/nfl /ndl" which will hide the directory and file listings. ::
:: ::
:: Sometimes a path enclosed in quotes does not work in robocopy unless you add a trailing space. Specifically, ::
:: this will happen if a path ends with a backslash (\). Since the source path always ends with a backslash in this ::
:: project, we add that space after the source path even when modified just to be sure that the robocopy command ::
:: will work. ::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
if %HideDetails%==Y (
echo Please be aware that the copying of files may take quite a while if your media is slow. Since you
echo have the variable called HideDetails set to Y, you will see no status below while files are being
echo copied. Please be patient and allow the process to finish.
echo.
)
if %Architecture%==DUAL goto DualArchitecture
::::::::::::::::::::::::::::::::::::::::::
:: Copying files to the FAT32 partition ::
::::::::::::::::::::::::::::::::::::::::::
robocopy "%SourcePath% " %Partition1%:\ /mir /xd sources "system volume information" $recycle.bin /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler1
robocopy "%SourcePath%sources " %Partition1%:\sources boot.wim /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler1
::::::::::::::::::::::::::::::::::::::::::::::::::
:: Copying files to the exFAT or NTFS partition ::
::::::::::::::::::::::::::::::::::::::::::::::::::
robocopy "%SourcePath%sources " %Partition2%:\sources /mir /njh /njs /xf boot.wim %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%SourcePath%boot " %Partition2%:\boot /mir /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%SourcePath%efi " %Partition2%:\efi /mir /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%SourcePath%support " %Partition2%:\support /mir /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%Partition1%:\ " "%Partition2%:\ " /mov autounattend*.xml /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
pause
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Creating an ei.cfg file. This will allow the user to select the edition of Windows to ::
:: be installed even if the OEM BIOS has a signature for a specific edition of Windows. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
if NOT exist %Partition2%:\sources\ei.cfg (
echo [CHANNEL] > %Partition2%:\sources\ei.cfg
echo Retail >> %Partition2%:\sources\ei.cfg
)
goto DoneCopying
:DualArchitecture
::::::::::::::::::::::::::::::::::::::::::
:: Copying files to the FAT32 partition ::
::::::::::::::::::::::::::::::::::::::::::
robocopy "%SourcePath% " %Partition1%:\ /mir /xd sources x64 x86 "system volume information" $recycle.bin /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler1
robocopy "%SourcePath%x64\sources " %Partition1%:\x64\sources boot.wim /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler1
robocopy "%SourcePath%x86\sources " %Partition1%:\x86\sources boot.wim /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler1
::::::::::::::::::::::::::::::::::::::::::::::::::
:: Copying files to the exFAT or NTFS partition ::
::::::::::::::::::::::::::::::::::::::::::::::::::
robocopy "%SourcePath%x64\sources " %Partition2%:\x64\sources /mir /njh /njs /xf boot.wim /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%SourcePath%x86\sources " %Partition2%:\x86\sources /mir /njh /njs /xf boot.wim /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%SourcePath%x64\boot " %Partition2%:\x64\boot /mir /njh /njs /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%SourcePath%x86\boot " %Partition2%:\x86\boot /mir /njh /njs /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%SourcePath%x64\efi " %Partition2%:\x64\efi /mir /njh /njs /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%SourcePath%x86\efi " %Partition2%:\x86\efi /mir /njh /njs /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%SourcePath%x64\support " %Partition2%:\x64\support /mir /njh /njs /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%SourcePath%x86\support " %Partition2%:\x86\support /mir /njh /njs /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
robocopy "%Partition1%:\ " "%Partition2%:\ " /mov autounattend*.xml /njh /njs %flag%
if %ERRORLEVEL% gtr 3 goto ErrorHandler2
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Creating an ei.cfg file. This will allow the user to select the edition of Windows to ::
:: be installed even if the OEM BIOS has a signature for a specific edition of Windows. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
if NOT exist %Partition2%:\x64\sources\ei.cfg (
echo [CHANNEL] > %Partition2%:\x64\sources\ei.cfg
echo Retail >> %Partition2%:\x64\sources\ei.cfg
)
if NOT exist %Partition2%:\x86\sources\ei.cfg (
echo [CHANNEL] > %Partition2%:\x86\sources\ei.cfg
echo Retail >> %Partition2%:\x86\sources\ei.cfg
)
:DoneCopying
:::::::::::::::::::::::::::::
:: Dismount the disk image ::
:::::::::::::::::::::::::::::
IF %AutoDismount%==N goto DismountDone
:::::::::::::::::::::::::::::::::::::::
:: Strip the backslash from the path ::
:::::::::::::::::::::::::::::::::::::::
IF "!SourcePath:~-1!"=="\" SET SourcePath=!SourcePath:~,-1!
::::::::::::::::::::::::
:: Dismount the image ::
::::::::::::::::::::::::
powershell.exe -command "Dismount-DiskImage -DevicePath \\.\%SourcePath%" > NUL
:DismountDone
cls
echo ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
echo :: Checking to see if this system has BlackLotus UEFI Bootkit Secure Boot mitigations ::
echo :: installed. If it does, we will use this to make your boot disk compatible with ::
echo :: systems that have this update applied. Please note that we can only make this disk ::
echo :: compatible from systems that have this mitigation applied. ::
echo ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
echo.
:: Check to make sure that the first of two mitigations are applied to this system.
:: The first mitigation adds the "Windows UEFI CA 2023" certificate to the UEFI "Secure Boot Signature Database" (DB).
:: By adding this certificate to the DB, the device firmware will trust boot applications signed by this certificate.
for /f %%a in ('powershell "[System.Text.Encoding]::ASCII.GetString((Get-SecureBootUEFI db).bytes) -match 'Windows UEFI CA 2023'"') do set "PowerShellOutput=%%a"
if "%PowerShellOutput%"=="True" (
goto CheckCondition2
) else (
goto NotInstalled
)
:CheckCondition2
:: Check to make sure that the second of two mitigations are applied to this system.
:: The UEFI Forbidden List (DBX) is used to block untrusted UEFI modules from loading. The second mitigation updates the
:: DBX by adding the "Windows Production CA 2011" certificate to the DBX. This will cause all boot managers signed by
:: this certificate to no longer be trusted.
for /f %%a in ('powershell "[System.Text.Encoding]::ASCII.GetString((Get-SecureBootUEFI dbx).bytes) -match 'Microsoft Windows Production PCA 2011'"') do set "PowerShellOutput=%%a"
if "%PowerShellOutput%"=="True" (
goto Condition2True
) else (
goto NotInstalled
)
:Condition2True
:: We have verified that the mitigations for the BlackLotus UEFI Bootkit are installed on this system. We will now update
:: the boot media to ensure that it can be successfully booted on systems with this mitigation applied.
:: Make sure that the files on the destination disk are not read only
attrib %Partition1%:\*.* -r /s /d > NUL 2>&1
:: Update the boot media to ensure compatibility with the mitigations.
COPY /Y %Partition1%:\EFI\MICROSOFT\BOOT\BCD %Partition1%:\EFI\MICROSOFT\BOOT\BCD.BAK > NUL
bcdboot c:\windows /f UEFI /s %Partition1%: /bootex > NUL 2>&1
COPY /Y %Partition1%:\EFI\MICROSOFT\BOOT\BCD.BAK %Partition1%:\EFI\MICROSOFT\BOOT\BCD > NUL
echo This system has the mitigations installed so we were able to patch your boot disk.
echo.
pause
goto DoneWithMitigation
:NotInstalled
echo This system does NOT have the mitigations installed so we are NOT able to patch your boot disk.
echo It is possible that disk may not boot on systems with those mitigations applied.
echo.
pause
goto DoneWithMitigation
:DoneWithMitigation
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Inform the user that we are done. Also, as a precaution, check to see if an ::
:: unattended setup answer file is present and warn the user if it is. ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
cls
echo All operations have been completed.
echo.
if exist %Partition2%:\autounattend.xml (
echo ^^!CAUTION^^! An unattended setup file ^(autounattend.xml^) is present on the 2nd partition.
echo As a result, if you boot from this disk, an unattended installation will begin. This has
echo the potential to wipe out the contents of disks attached to your system without warning.
echo.
echo It might be a wise idea to carefully label the bootable media to reflect this situation.
echo As an alternative, consider temporarily renaming the autounattend.xml to something else.
echo.
)
pause
:END
exit
:::::::::::::::
:: FUNCTIONS ::
:::::::::::::::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: The following is a function that can be called to convert ::
:: the contents of a variable to uppercase characters. ::
:: ::
:: To use this function, call this function and pass it the ::
:: name of the variable to convert. In the example below we ::
:: are passing "str" as the variable name. ::
:: ::
:: Example: call ::TOUPPERCASE str ::
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:TOUPPERCASE
if not defined %~1 exit /b
for %%a in ("a=A" "b=B" "c=C" "d=D" "e=E" "f=F" "g=G" "h=H" "i=I" "j=J" "k=K" "l=L" "m=M" "n=N" "o=O" "p=P" "q=Q" "r=R" "s=S" "t=T" "u=U" "v=V" "w=W" "x=X" "y=Y" "z=Z" "ä=Ä" "ö=Ö" "ü=Ü") do (
call set %~1=%%%~1:%%~a%%
)
goto :eof
:::::::::::::::::::::::::::::
:: Error Handling Routines ::
:::::::::::::::::::::::::::::
:ErrorHandler1
cls
echo There was an error copying files to partition #1. Please verify that partition #1 has sufficient space available.
echo Please correct the situation and run the script again. If you are changing the partition sizes, then you will
echo need to use the WIPE operation to create new partitions with the newly specified sizes.
echo.
pause
goto END
:ErrorHandler2
cls
echo There was an error copying files to partition #2. Please verify that partition #2 has sufficient space available.
echo Please correct the situation and run the script again. If you are changing the partition sizes, then you will
echo need to use the WIPE operation to create new partitions with the newly specified sizes.
echo.
pause
goto END
It’s like that sometimes
