Logitech BRIO Webcam

Deleted member 952 · Jan 12, 2022

I was going to buy a brio for windows hello, maybe I should leave it?

Stigg · Jan 18, 2022

kuyenmotdivad said:
I was going to buy a brio for windows hello, maybe I should leave it?

Windows Hello works fine for me. I tested it for a few days.
I decided not to continue using it as I find it a bit annoying.
It can unlock when I don't want it to just by going near my desk.

Deleted member 952 · Jan 18, 2022

Stigg said:
I have two Logitech BRIO webcams. One runs on a Windows 11 PC and one on a Windows 10 PC.
Most of the time, they work good.

But every now and then, they fail to work on both PCs and there is a yellow exclamation mark in the Device Manager with a "Set Address Failed" error. All it takes to rectify the problem is to unplug the USB cable and plug it back in, but I would rather that it didn't happen at all.

I am using the latest driver that I can find. It is version 1.0.85.0 dated August 28, 2017.
I'm a bit surprised that the latest driver for their current webcam is that old, but that is all I can find.

Does anyone else have a Logitech BRIO webcam? If so, have you had this problem with it?

I got this error when I updated my BIOS to the latest version, seems fine at the moment.

Stigg · Jan 18, 2022

kuyenmotdivad said:
I got this error when I updated my BIOS to the latest version, seems fine at the moment.

Just unplug it and plug it back in. I am sure you've already done that.
I really think it's a driver issue. The driver is old and hasn't been updated.

klepp0906 · Jul 16, 2022

anyone on 22H2 and have this working? Mine just arrived yesterday and while it works for like recording with windows camera etc/can see it in device manager - it does nothing with windows hello. says windows hello is unavailable.

klepp0906 · Jul 16, 2022

cant edit my previous post for some reason (time limit?)
anyhow, turned out i removed the optional feature for windows hello face when i did my initial install purge and forgot about it. re-adding that was the fix (mostly).

after adding it I had to unplug and re plug the camera into the usb port then i was in business. Now I just have to find a non janky way to elevate it a bit since the stand covers my screen due to the bezel only being about 3/16" thick.

anybody know which of the veritable slew of Logitech softwares is best for the webcam?
I dont want bloat so things like the Ghub or whatever it is sounds terrible. Akin to asus armory etc. That leaves Logitech camera settings, Logi Tune, Logitech Capture. What are you guys using/do you suggest?

Brink · Jul 16, 2022

klepp0906 said:
cant edit my previous post for some reason (time limit?)
anyhow, turned out i removed the optional feature for windows hello face when i did my initial install purge and forgot about it. re-adding that was the fix (mostly).

after adding it I had to unplug and re plug the camera into the usb port then i was in business. Now I just have to find a non janky way to elevate it a bit since the stand covers my screen due to the bezel only being about 3/16" thick.

anybody know which of the veritable slew of Logitech softwares is best for the webcam?
I dont want bloat so things like the Ghub or whatever it is sounds terrible. Akin to asus armory etc. That leaves Logitech camera settings, Logi Tune, Logitech Capture. What are you guys using/do you suggest?

I didn't install any software for my Logitech BRIO 4K Pro webcam. I just used the driver Windows installed for it, and it was ready for Windows Hello facial recognition without issue.

klepp0906 · Jul 16, 2022

Brink said:
I didn't install any software for my Logitech BRIO 4K Pro webcam. I just used the driver Windows installed for it, and it was ready for Windows Hello facial recognition without issue.

Oh yea, it’s working for windows hello now which is 99% what I bought it for. The fingerprint scanner would constantly fail after awhile and it got annoying re setting it up. This is that much more convenient.

I’m just trying to cover the other 1%. Like how do I change the resolution or the frame rate it’s recording at etc?

Or is that something that is agnostic and would/could be done by whatever software I’m actually using to record at the time so long as it’s supported by the hardware/driver?

I never owned a webcam, I’m new to these things

Brink · Jul 16, 2022

klepp0906 said:
Oh yea, it’s working for windows hello now which is 99% what I bought it for. The fingerprint scanner would constantly fail after awhile and it got annoying re setting it up. This is that much more convenient.

I’m just trying to cover the other 1%. Like how do I change the resolution or the frame rate it’s recording at etc?

Or is that something that is agnostic and would/could be done by whatever software I’m actually using to record at the time so long as it’s supported by the hardware/driver?

I never owned a webcam, I’m new to these things

You can open Settings > Bluetooth & devices > Cameras to select Logitech BRIO and adjust any available settings there.

Change Default Camera Settings and Studio Effects in Windows 11

This tutorial will show you how to change or reset the default brightness, contrast, and other available image settings and Studio Effects for a camera in Windows 11. Having a camera as part of your Windows device or system lets you make Skype video calls, take pictures, etc. Many apps and...

www.elevenforum.com

Dru2 · Jul 17, 2022

klepp0906 said:
I’m just trying to cover the other 1%. Like how do I change the resolution or the frame rate it’s recording at etc?

If you just want the basics from Logitech, check the "Logi Tune" app to adjust the webcam's settings. Nowhere near the bloat of G-Hub.

Logitech BRIO Webcam

Deleted member 952

Guest

My Computer

Well-known member

My Computers

Deleted member 952

Guest

My Computer

Well-known member

My Computers

Well-known member

My Computer

Well-known member

My Computer

Administrator

My Computers

Well-known member

My Computer

Administrator

My Computers

Well-known member

My Computers

Similar threads